Cleaning Laminate Floors With Bleach? (Learn the RISKS!) 

Bleach can show an incredible performance while cleaning and disinfecting your floors and walls. But they might not remain friendly to laminate floors. So, can you clean laminate floors with bleach?

Yes, you can but there are some risks involved. Laminate floors are not made of natural wood. Instead, they use synthetic material. These floors are durable but might lose their shine if exposed to bleach for extended periods. Moreover, bleach can whiten the beautiful print of the floor. 

However, cleaning the floor with diluted bleach once in a while won’t cause any scary damage. So, how to use it, and how can you repair the floor from bleach damage? Read this article and find out!

How Can You Clean Laminate Floors With Bleach?

If you dilute the bleach as much as you can and apply that sparingly to your laminate floors, we can hope to get away with it. 

But first, you should test the solution on a smaller surface area before applying it over the whole floor. If you notice it’s damaging the finish of your floor, or discoloring it, do not use that solution. 

You can add 3-4 cups of bleach to a gallon of water to dilute the bleach. Now take the solution in a bucket or spray bottle and start applying it to your floor. 

Mop the floor with a microfibre cloth or a soft-bristled mop. Leave the solution for five minutes. After that, spray clean water, and rinse the floor. You may repeat rinsing so no bleach residue stays over your floor. 

Another thing to remember is never to use bleach if you have recently used any cleaner over the floor. If the other cleaner contains ammonia and leaves a residue over the floor, bleach can react with them. As a result, it will form chlorine gas, which can be toxic. 

Also, keep the windows open so the room can have good ventilation. Bleach can affect your skin and lungs if you’re not careful using this cleaning agent. 

Why You Should Avoid Cleaning Laminate Floors With Bleach

There’s no doubt that bleach works excellently to clean and disinfect any surface. But laminate floors might not be the perfect stage for bleach to show its performance.

Bleach contains a chemical named Sodium Hypochlorite. Its presence is about 5% in the bleach. This particular chemical performs an oxidation reaction with chromophores and whitens them. Moreover, it oxidizes the cells of germs, therefore sanitizing the surface. 

women cleaning laminate floors image

Bleach also contains Sodium Hydroxide. This chemical is notorious for its corrosive nature and is called caustic soda. And for this chemical, bleach can burn and clean many substances and dirt. 

Now, if you inspect your laminate floor, you’ll know there are many synthetic layers laminated to make this aesthetic flooring. The top layer is durable, and a beautiful texture is printed over it.

If you apply bleach on this floor, it will start to damage the glossy shine of this layer. Moreover, bleach can whiten and discolor the finish of this layer.

Also, if the solution spills under the layer, it can deform the texture of the floorboards. As a result, you may find unevenness on your floor. 

So, to stay on the safe side, it’s better to avoid using bleach on your laminate floor.

What Can You Use To Clean Laminate Floors Instead of Bleach?

Many options are available to clean laminate floors instead of bleach. Remember, always use mild cleaner on this unique type of flooring. Using harsh cleaners can damage the floor. And sometimes, repairing that won’t be easy. 

Here are some cleaning remedies you can use to clean your laminate floors- 

  • Mild Soap
  • Baby Shampoo
  • Wax or Oil-based Cleaners
  • Specialized Cleaners for Laminate Floors
  • Rubbing Alcohol
  • White Vinegar

Remember to dilute vinegar if you’re using that as a cleaner. Also, never keep your laminate floors soaked. Rather than splashing water and the cleaner, spray a small amount and mop the floor with a soft material. 

Can You Repair the Laminate Floor From Bleach Damage?

Repairing laminate floors with bleach damage might not be an easy task to do. Moreover, sometimes it may be irreparable, and you may have to change the flooring boards.

However, we know some ways to save a dying floor plank, which can be helpful to you. You can sand and stain the damaged part of the floor to bring back its shine. Another way is to use baking soda solution over the bleach marks. 

Laminate floor cleaning image

We’ll discuss both methods in brief. 

Sand And Stain 

Observe if the damage is severe or not. If the bleach has not ruined the flooring fibers, sanding might be enough. 

To start repairing, first, you need to clean the floor with a vacuum cleaner. Ensure that no dirt is left on the flooring. Now, have the following supplies ready- 

  • 100-grit sandpaper 
  • Laminate repair paste
  • A piece of denim cloth

You need to sand the damaged areas with the corner of the sandpaper. Keep sanding on the spots to remove the mark. 

Now, use laminate repair paste to apply over the area. Distribute it evenly, so the floors become level again. Leave the past for half a day, and then polish the layer with a fine-grit sander or a piece of denim cloth.

Baking Soda Solution 

Baking soda works great in removing stains. You can use it to remove the yellow bleach stains as well. 

For this, you may need- 

  • Baking soda
  • Hydrogen Peroxide
  • Vinegar

First, apply 2-3 tablespoons of baking soda over the damaged area. The measurement may vary depending on the area of the bleach stain. 

Now, pour some drops of 6% hydrogen peroxide solution over the baking soda. Then add a little amount of white vinegar.

After that, you need to brush the whole solution with a non-abrasive brush. Do this for a while, and then wipe the solution from the floor. 

You’ll see the bleach mark is gone from the floor’s surface. 

Remember, these two methods will only work if the damage is minimal. Otherwise, you may need to replace that particular planck. To do so, make sure you choose new planks of the same design and pattern so it does not look abnormal.

Wonder why your wood floor is turning black? Check this article and find an instant solution! 

Quick Tips To Clean Laminate Floors

So if you’re having trouble cleaning your floors, these tips might help you- 

  • Never use ammonia, bleach, or other harsh cleaners on your laminate floor
  • Do not let any liquid penetrate your flooring. Moisture is sometimes the number one enemy for your laminate floors. 
  • Use a vacuum cleaner to clean your laminate floors every day. 
  • If something spills over the floor, clean it with a soft cloth before it’s too late. 
  • Always use soft cloths to wipe laminate floors. It can be a microfibre cloth or a mop with soft bristles. 
  • Clean the floors at least once in two months. If it gets dirty a lot, consider cleaning once in two weeks. 

Final Thoughts

Laminate floors are aesthetic and give you a close-to-nature feel in your rooms. But in terms of cleaning these floors, never use abrasive cleaners.

So, you can clean laminate floors with bleach, but it’s better to avoid using bleach. This harsh cleaner can damage the shine, coloring, or texture of your laminate floors. 

Some FAQs

How Can I Disinfect My Laminate Floors?

You can use regular dish soap to disinfect your laminate floors. Another option would be using baby shampoo. Furthermore, you can use natural options like diluted white vinegar. But remember not to use harsh agents on your laminate floors to protect their glossy finish. 

Is Diluted Bleach Safe for Laminate Floors?

Diluted bleach is often safe for laminate floors if not applied regularly. You can take a gallon of water and add 3/4 cup of bleach to make the cleaning solution. Also, remember to rinse the floors well after applying diluted bleach. 

How Often Should I Clean Laminate Floors?

It’s better to clean laminate floors once every two weeks. However, if the floor is used less, cleaning it once a month or two will do as well. But whenever something spills on the floor, clean it as soon as possible. 

Can I Use Vinegar on Laminate Floors?

Yes, you can use white vinegar on laminate floors, as it’s safe. But make sure to dilute it first with water. You can mix 1 cup of white vinegar with a gallon of water. It will be the cleaning solution. Then, you can apply it on laminate floors and mop with it for better results.

Can I Clean Vinyl Floors With Bleach?

Yes, but bleach can damage the aesthetic finish of your vinyl floors. You can dilute bleach with water and mop your vinyl floors with the solution. It will disinfect and clean your floors. But still, there is a chance that bleach will ruin the surface and coloring, and it might be irreparable.