6 Safest Ways to Clean NuCore Vinyl Floor (AVOID Doing This!)

You can clean your NuCore waterproof vinyl flooring by dry cleaning it or rinsing it with mild substances and detergent. Vinyl flooring is long-lasting and enticing. It looks like hardwood but at a budget. 

Even though the vinyl floor can take heavy loads and not damage easily, you can damage the NuCore floor if not taken care of correctly and by using harsh chemicals for cleaning. Thankfully, cleaning vinyl flooring is easy and cheap. 

This article has explained six inexpensive, easy, and effective ways to clean the NuCore vinyl floor. Also, you’ll get to know about preventing your vinyl floor from being damaged.

How to Clean NuCore Vinyl Floor?

You need to be extra careful while cleaning your NuCore vinyl flooring. The layer of NuCore flooring is made of luxury vinyl. The vinyl layer can get damaged and lose its water resistance feature if the wrong products are used to clean it. Here are some easy ways to safely clean your NyCore vinyl floor-

  • Clean with a steam cleaner.
  • Clean the floor with apple cider vinegar.
  • Dry clean the vinyl floor with a broom.
  • Use baking soda to remove drink and food stains.
  • Use rubbing alcohol to remove stubborn spots.
  • Clean with a mild liquid detergent. 

What is NuCore Vinyl Flooring?

NuCore vinyl flooring is a type of flooring used in houses. NuCore flooring features a vinyl covering. The vinyl looks like hardwood but is far less expensive than genuine hardwood. 

NuCore vinyl floor is durable, long-lasting, and waterproof, giving your house a luxurious look. NuCore vinyl floor maintenance is much easier than hardwood or natural wooden floors. 

vynl floor cleaning image

6 Safe and Effective Ways to Clean NuCore Vinyl Floor.

Steam cleaning.

Steam cleaning is an excellent method for cleaning wooden floors. You would need to fill your steam cleaner with distilled water. Before steam cleaning, dust off the floor with a broom. Plug the steam cleaner and preheat it, ensuring it is not too hot.

Now start steaming the floor and keep moving the steamer on the floor. After steam cleaning the NuCore floor surface, clean the floor with a dry towel to remove the moisture.

Apple cider vinegar. 

One of the most excellent materials for cleaning the NuCore vinyl floor is apple cider vinegar. The acidic component of apple cider vinegar gently eliminates dirt particles without damaging the floor. 1 cup of apple cider vinegar and 1 liter of lukewarm water.

Clean the NuCore floor with a moistened mop and vinegar mix. To thoroughly clean the floor, add a few droplets of liquid detergent to the mix. To make the floor shine, mix olive oil into the vinegar solution.

Baking soda.

Food and drink spills, such as red wine, grape juice, tomato ketchup, mustard sauce, etc., leave stubborn spots on the NuCore vinyl floor. You can remove these spots by using baking soda. 

Make a thick mixture of baking soda and water; apply it on the spot; let it sit for ten to fifteen minutes; rub it gently until the spots come out. Clean well to remove any marks from baking soda.

Rubbing alcohol.

You can remove stains from nail polish, lipstick, ink, paint, etc. from NuCore vinyl waterproof flooring by using rubbing alcohol and a soft cloth. 

Use several drops of rubbing alcohol to the spot and clean it away with a microfiber sponge until the spot is gone. You can apply some mink oil to the floor to ensure the rubbing alcohol doesn’t fade the floor color.

Mild liquid Detergent.

Liquid detergent is a very cheap and available household item used for decades for cleaning purposes. Mix four to five drops of mild liquid detergent into a large bowl of cold water and mix it well. 

vinyl floor cleaning with detergent

Soak a microfiber cloth into the detergent and wipe the floor all across. Rinse the NuCore vinyl floor with clean water after wiping it with the detergent and water mixture. Finally, use a dry towel to wipe any remaining wetness.

You can use this non-toxic, mild Forever Aloe MPD 2X Ultra detergent for cleaning your NuCore vinyl floor. You can also use dawn dish soap to clean your vinyl flooring.

Dry cleaning.

You do not need to mop your NuCore vinyl floor daily with wet ingredients, but you must keep the NuCore floor clean from dust and debris. You may use a sweeper, dry sponge, or vacuum to clean the NuCore vinyl flooring. 

How to Prevent Waterproof Vinyl Floor from Damaging?

Use a carpet.

Use a carpet over your NuCore vinyl floor to prevent it from dirt, marks, and dents. Using a carpet all over the house might be costly, so that you can use carpets in high-traffic rooms or areas. 

You can also use a doormat in front of your rooms and house door to prevent dirt from entering the house. Before walking onto the floor, clean your shoes on the doormat. 

Clean regularly.

It would be best if you cleaned your NuCore vinyl floor regularly to prevent it from damaging. Dry clean the floor daily and use liquid detergent or a vinegar solution to clean the floor once weekly. Remove any stain immediately from the NuCore vinyl floor.

Use vinyl coasters under the furniture.

The NuCore vinyl floor can often get dents from heavy furniture legs. The dents may create floor deterioration. Place vinyl coasters under the furniture legs to prevent the floor from having dents.

You can find coasters for furniture on Amazon.

Don’t use harsh cleaning agents.

Avoid using harsh cleaning agents on the NuCore vinyl floor can tear down the floor. The floor has a protective vinyl layer which makes the floor waterproof and durable. Cleaning agents with harsh chemical substances can fade the protective layer. 

By decreasing lifespan, they can lead the NuCore vinyl floor to severe damage. People often use bleach to clean the floor, but bleach is harmful to laminate floors like NuCore vinyl floors. Bleach will eventually fade the waterproof coating of the NuCore vinyl floor. 

Frequently Asked Questions (FAQS).

What can I use to clean my waterproof vinyl floor?

White vinegar or apple cider vinegar works wonder to clean waterproof vinyl floors. Add the vinegar to a gallon of hot water. Wet your mop and wipe the floor. The vinegar will remove stains and dirt from the floor.

What is the best mop for a vinyl floor?

Microfiber mops are ideal for mopping vinyl and other hardwood floors. Their soft bristles protect the floor from scratches and marks. You can use these mops for both wet and dry cleaning. 

Can you use Pine-sol on the vinyl plank floor?

The vinyl plank floor is suitable to wash using Pine-sol multi-surface cleanser. Both original and scented Pine-sol cleaner effectively cleans the vinyl plank floor. It does not only clean but also disinfect the floor.

Can you use Clorox bleach on vinyl waterproof plank floors?

You can use three-fouth cups of Clorox regular bleach mixed with a liter of water. Allow the bleach and water mixture to sit on the floor for 5 minutes before rinsing it off. Never use Clorox or any other bleach directly on the floor; always dilute it.

Why does my waterproof vinyl floor look dull?

The waterproof vinyl floor has a thin coating of vinyl that makes the floor look shiny. The shine can fade away, and the floor may look dull over time if not cleaned regularly and if the floor has too much load of furniture. 

Conclusion.

NuCore waterproof vinyl flooring gives your house a hardwood floor appearance but at a budget-friendly cost. NuCore vinyl floor is long-lasting and durable, but lack of care and cleanliness can damage the floor. To avoid breakage, keep the floor clean on a routine basis. 

Follow these cleaning methods to safely clean your NuCore vinyl flooring- cleaning with a steamer, cleaning with apple cider vinegar, dusting the floor with a broom, removing food and drink spills with baking soda, eliminating stubborn paint stains with rubbing alcohol, and wiping the NuCore vinyl flooring with mild detergent.